Maintenance; Installing Or Removing The Lid/Strainer Basket - Speck pumpen BADU 93 Serie Manual Del Usuario

8

Maintenance

NOTICE
Before maintenance work, close all shut-off valves and drain

all pipes.
All pumps
When?
Regularly
If there is a chance of
frost
Additionally for pumps with plastic lanterns (AK version)
When?
Regularly
Prior to longer idle
periods
After completing all maintenance work, perform all necessary

measures for start-up. See point 6.1 on page 22
Service addresses can be found on our website

www.speck-pumps.com.
8.1

Installing or removing the lid/strainer basket

Any lids and strainer baskets must be removed for work to be
performed. See 8.1 in the associated pump data sheet.
06|2021
What?
Clean strainer basket.

Drain pump and pipes sensitive

to frost in good time.
What?
Remove salt crystals caused by

the salt water. See point 8.3 on
page 28
Rinse the pump with tap water

to prevent crystals from forming
on the mechanical seal.
Maintenance
EN 27