Cardin Elettronica ELSNAP RAPID S Manual De Instrucciones página 19

FUNZIONAMENTO A BATTERIA
The barriers can be fitted with buffer batteries which allow them to function with
the SUN POWER system for isolated installations where mains power supply is
not available.
For installation and battery powered operation consult the instruction manual ZVL650
supplied with the battery charger CB24 and the instruction manual ZVLISTSUNPOWER
supplied with the SUNPOWER KIT.
MAINTENANCE
Attention! Before carrying out any cleaning or maintenance operations make sure
the power is disconnected at the mains, the motor power cables are disconnected
and the batteries have been disconnected.
Eventual repair work must be carried out by specialised personnel using original
spare parts.
The motor does not normally require particular maintenance; in any case the 24
month or 1 million manoeuvre guarantee is only valid if the following controls have
been observed and eventual maintenance has been carried out to the machine
'road barrier':
- periodically check the moving parts for wear and tear and grease if required
using lubricants which maintain their friction levels unaltered throughout time
and are suitable for temperatures of -20 to +70°C;
- periodically check the correct operation of all safety devices (photoelectric cells,
safety edges etc.);
- check the battery charge level.
These checks must be written down as they are paramount in validating the guarantee
as stipulated in Cardin Elettronica's General Sales Conditions.
19