Thermo King SL Manual De Instrucciones página 80

Record Unit Model __________________________________________________
Record Unit Serial Number ___________________________________________
Record Unit Microprocessor Type ______________________________________
Record DAS Sensor Calibrations and Names
DAS Sensor 1 Grade ________Location _____________________________
DAS Sensor 2 Grade ________Location _____________________________
DAS Sensor 3 Grade ________Location _____________________________
DAS Sensor 4 Grade
________Location _____________________________
DAS Sensor 5 Grade ________Location _____________________________
DAS Sensor 6 Grade ________Location _____________________________
DAS Setup*
Set Trailer ID Number _______________________________________________
Set Unit ID Number _________________________________________________
Record DAS Serial Number ___________________________________________
Set Clock/Calendar __________________________________________________
Set Logging Interval _________________________________________________
(default setting 15 minutes)
Set DAS Sensor Calibrations and Names (check when complete)
Set DAS Sensor 1 Grade
Set DAS Sensor 2 Grade
Set DAS Sensor 3 Grade
Set DAS Sensor 4 Grade
Set DAS Sensor 5 Grade
Set DAS Sensor 6 Grade
*Use Wintrac 3.90 or higher software and PC computer to setup the DAS during installation.
DAS Setup Sheet
Countdown Mode Setup Hours ________________________________________
(default setting 24 hours)
Conservative Mode Setup Logs ________________________________________
(default setting 96 logs)
Set Unit Micro Sensors (if applicable)___________________________________
Select Logged Information (time or disabled) _____________________________
Send Start of Trip (SOT) _____________________________________________
Verify Sensor Readings on Unit and Wintrac _____________________________
(OPTIONAL)
DAS Digital Input 1 Connection _______________________________________
(OPTIONAL)
DAS Digital Input 2 Connection _______________________________________
(OPTIONAL)
DAS Digital Input 3 Connection _______________________________________
(OPTIONAL)
DAS Digital Output 1 Use ____________________________________________
(OPTIONAL)
DAS Digital Output 2 Use ____________________________________________
Eng
80