Increment/Decrement Switches; Charging The Battery - Coltene CanalPro CL2 Manual Del Usuario

4.1.5 Increment/Decrement Switches

4.1.5.1 The switches are used to increase (Increment Switch) or decrease
4.2

Charging the Battery

Prior to operation the battery must be fully charged according the instructions
below:
4.2.1 Ensure that the site main power is working and that the CanalPro
corded with the proper type of power cord for power available at the site.
4.2.2 Plug the power cord into both the charging base and the wall outlet.
4.2.3 Turn the power switch on the charging base to on and ensure that the
charging LED lights green.
4.2.4 Place the handpiece into the charging base before the first use and fully
charge the handpiece. The charging base LED will be yellow when the
handpiece is not in place. When the handpiece is place in the charging base
the LED will light green indicating that the unit is charging. An audible
buzzer will sound when the handpiece is placed in the charging base.
4.1.4.1.3 When Auto Stop Reverse Forward (ASRF) is
selected:
4.1.4.1.4 When Auto Stop Reverse Stop (ASRS) is selected:
blinks
4.1.4.1.5 When Auto Stop is selected:
4.1.4.1.6 The select switch will be initialized (speed adjustment
mode) if the program switch is pressed while selecting
any item using the select switch.
(Decrement Switch) the value of the item selected using the
select switch.
WARNING!
If there is not audible buzzer or LED light on after
the handpiece is placed in the charging base imme-
diately stop using the CanalPro
Customer Service.
CanalPro CL2 Cordless Handpiece
TM
and will blink.
blinks
CL2 and contact
TM
CL2 is
TM
9