Chicago Pneumatic BOOSTER 8000 Manual Del Usuario página 13

4. Start the engine
Turn the ignition key for a maximum of 8-10 seconds,
wait for a further 3 minutes before attempting to start
again.
5. Disconnection of the tension
After starting, disconnect the voltage selector.
6. Disconnection
Having started the engine, disconnect the blue (-)
clamp 1st, followed by the red (+) clamp.
7. Storing
Return the cables and clamps to their support posts
on the Booster.
8. Recharging
Recharge the Booster immediately after use and leave
it permanently connected !
- 13 -