Preparing the Food Processor for Use
4. The 2-piece cone offers two sizes;
choose the right size for the fruit you
are juicing. Use the outer cone for
grapefruit, oranges and other large
fruits. Remove the outer cone to reveal
a smaller inner cone that's perfect for
lemons and limes.
5. Open the lid and place the cone inside
the strainer basket over the power
shaft. It may be necessary to rotate the
cone until it falls into place.
6. Halve the fruit to be juiced.
7. Place fruit half on cone.
8. Close the lid of the strainer basket.
Hold the lever arm down firmly with an
open palm to maintain even pressure.
Operate the citrus press only when
the lever arm is in the down position,
holding the fruit on the cone.
NOTE: Use of the citrus press without the
clip-on lever arm is not recommended. If
you do use it without the lever arm, remove
the lever arm from the basket (see step 14).
All manuals and user guides at all-guides.com
10. When juice is fully extracted, press the
NOTE: Do not exceed the maximum liquid
level line (see page 12) on the work bowl,
or juice will leak from the bowl.
11. Unplug the Food Processor.
12. Unlock the strainer basket by turning
13. Remove the work bowl from Food
14. The lever arm can be unclipped from
15. When reattaching the lever arm to the
11
9. Operate the citrus press by pressing
the "I" Button or the "Pulse" Button.
"O" Button.
it clockwise. Remove juiced fruit, cone,
and strainer basket from the work
bowl.
Processor and pour juice into desired
container.
the strainer basket for thorough
cleaning. To detach, pull the clip at the
bottom of the basket away from the
basket side and remove the lever arm
from the basket.
strainer basket, make sure the tab on the
handle snaps securely into the slot on
the basket.