Troubleshooting - KitchenAid ARTISAN 5KFPM776 Instrucciones Y Recetas

• If your Food Processor should fail to
operate, check the following:
– Make sure the work bowl and work bowl
cover are properly locked on the base,
and the food pusher is inserted to the
maximum fill line on the feed tube.
– See if the Food Processor is plugged into
a proper electrical outlet (see "Electrical
Requirements" on page 3). If it is,
unplug the Food Processor, then plug it
into the same outlet again.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire or electrical
shock.
If the Food Processor still does not work,
check the fuse or circuit breaker on the
electrical circuit the Food Processor is
connected to and make sure the circuit
is closed.
All manuals and user guides at all-guides.com

Troubleshooting

• If your Food Processor should fail to
– Make sure the raised-blade side of the
• If your Food Processor lid won't
– Make sure the disc is installed correctly
• If the Food Processor shuts off
– The Food Processor may be overheated. If
• If you have difficulty removing the
– Food particles are probably lodged in the
If the problem cannot be corrected
with the steps in this section, see the
KitchenAid warranty and after sales service
section on pages 27-28. Do not return the
Food Processor to the retailer – they do not provide service.
16
slice or shred when using the disc:
disc is positioned face up on the disc
stem. The disc has a raised nub on the
top and grooves underneath to help
align it properly.
close when using the disc:
with the raised nub on top, and is
positioned properly on the disc stem.
while it is running:
the motor exceeds a certain temperature,
it will automatically shut off to prevent
damage. This should be an extremely
rare occurrence. If it happens, press the
"O" Button and wait 15 minutes for the
Food Processor to cool before resuming.
If the Food Processor still refuses to run,
wait an additional 15 minutes for the Food
Processor to cool.
food pusher from the feed tube:
interlock system. To free the pusher, soak
the work bowl cover in warm water or
wash it in a dishwasher.