Chapter 5 - Use; Acquisition Of Radiographic Images - KaVo IXS 1.013.2003 Manual Del Usuario

Chapter
5

Acquisition of Radiographic Images

Turn on the PC that has the KaVo IXS installed and launch the imaging software,
such as VixWin Platinum (please refer to the software manual for information on the
software program).
1. Carefully plug the USB end of the sensor cable into the PC USB port.
Do not use force, ensure that the plug is properly oriented with the PC
port. Try rotating the USB plug if it does not easily insert into port.
CAUTION
Use extreme care when mounting the sensor inside a cabinet.
Pinching/crushing the sensor cord or USB Extension Cable can
damage the cord and cause image derogation or failure.
2. Set the required technical settings (exposure time, etc.) on the X-ray
generator (refer to X-ray Dose / Exposure Time Settings on page 5-4.
CAUTION
Use KaVo IXS Holders and Positioning System only.
3. Assemble the KaVo IXS rings, bars and holders so that the entire
sensor area is visible through the ring. This applies to horizontal or
vertical Bitewing holders, and periapical (anterior or posterior) holders.
4. Apply a new disposable sheath to the image sensor, making sure that
it covers the portion of the cable which may come into contact with the
patient.
English
Use
5-1