Husqvarna WR 250 2012 Caracteristicas - Uso - Mantenimiento página 103

- Pump with brake lever (3) or brake pedal (3A) in order to
push brake fluid out of line.
- Close the bleeding valve and fill the reservoir with fresh brake
fluid.
- Open the bleeding valve, apply the brake using the brake le-
ver or pedal, close the bleeding valve with the brake lever or
pedal applied and then quickly release the lever or pedal.
- Repeat this operation until the brake line is filled and clear
fluid starts coming out of the plastic hose: now close the bleed-
ing valve.
MUM2_WR250-300_2012_GB.indd 45
- Restore the brake fluid level (A) or (B) then reassemble the
rubber and the fluid reservoir cap.
After the brake fluid replacement, it is necessary to operate the
braking system bleeding (see pages 46 and 48).
B
EN - 45
9-05-2011 18:03:04