Disposal; Disposal Of Electrical And Electronic Equipment; Marking - Dräger PID 5000 Instrucciones De Uso

en

Disposal

5. Follow the instructions on the display.
WARNING
Make sure that the hoses are correctly connected, as
otherwise the Air Guard does not provide reliable measured
values.
► The hose that is connected to the Dräger-Tube must be
connected to the "inlet ref" connection and the other hose
must be connected to the "inlet" connection.
► Do not remove the hose on the "outlet" connection during
the entire test.
► If you have any questions, contact Dräger.
NOTICE
Note that the reference gas must be removed before applying
the span gas (pay attention to the reading in the display) as
otherwise the hoses may suddenly rupture or become
detached. Connect the span gas directly to the "inlet meas"
connection.
6. Fit all hoses back on the PID 5000.
7. Return to the menu and choose "Cleaning", then click on
"run".
8. Wait until the displayed current values are below 10 pA and
then exit the purge operation.
9. Return to measuring mode.
28
7 Disposal
Disposing of the product generates different types of waste. A
distinction must be made between hazardous and non-
hazardous waste that must be disposed of in accordance with
local applicable regulations and guidelines.
7.1 Disposal of electrical and electronic
equipment
Electric and electronic equipment are subject to
national and international waste disposal regulations
and must not be disposed of as residential waste. This
is indicated by the adjacent symbol. Dräger accepts
returns of electrical and electronic devices. For
information please contact the national marketing
organizations or Dräger.
8

Marking

WARNING
Do not remove or modify the safety markings on the product.
Damaged or missing safety markings should be replaced
immediately with markings matching the originals.