Manual Cleaning And Disinfection; Disposal Of The Medical Device; Technical Data - Dräger MP045 Serie Instrucciones De Uso

WARNING
Risk of stress cracking
Do not use disinfectants or cleaning agents
containing alcohol.
Observe the hygiene regulations of the hospital.
Testing of procedures and agents
The cleaning and disinfection of medical devices has
been tested with the following procedures and
agents. The following agents showed good material
compatibility at the time of the test:
®
– Dismozon pur by Bode Chemie GmbH & Co
®
– Buraton 10 F by Schülke & Mayr

Manual cleaning and disinfection

Manual disinfection should preferably be carried out
with disinfectants based on aldehydes.
Observe the applicable country-specific listings for
disinfectants. The list of the German Association for
Applied Hygiene (Verbund für Angewandte Hygiene
VAH) applies in German-speaking countries.
The composition of the disinfectant is the responsi-
bility of the manufacturer and can change over time.
Strictly observe the manufacturer's information on
the disinfectant.
Carry out manual cleaning and disinfection
 Remove soilings with a wipe soaked in disinfec-
tant.
WARNING
Penetrating liquid may cause malfunction of or
damage to the device, which may endanger the
patient. Only wipe-disinfect device surface and
make sure no liquids penetrate into the device.
Instructions for use Flowmeter
1 Carry out surface disinfection.
2 After contact time, remove disinfectant residues.

Disposal of the medical device

When disposing of the medical device:
 Consult the relevant waste disposal company for
appropriate disposal.
 Observe the applicable laws and regulations.

Technical data

Ambient conditions
During operation
Temperature 10 °C to 40 °C
(50 °F to 104 °F)
Atmospheric 700 to 1200 hPa
pressure (10.2 to 17.4 psi)
Relative humidity 0 to 95 %, no
condensation
During storage and transport
Temperature –20 °C to 70 °C
(–4 °F to 158 °F)
Atmospheric 800 to 1200 hPa
pressure (11.6 to 17.4 psi)
Relative humidity 0 to 90 %, no
condensation
Performance characteristics
Operating pressure 4.5 bar (65.3 psi)
Setting ranges 0.5 to 4 L/min
2 to 10 L/min
2 to 16 L/min
4 to 32 L/min
English / English US
Accuracy of flow rate at: ±15 % (corresponding to
4.5 bar (65.3 psi)* smallest setting value)
(1013 hPa/20 °C/68 °F)** ±10 % (all other setting
values)
Device characteristics
Screw thread for accessories
Oxygen
M 34 x 1.5 or
9/16" adapter
Air M 32 x 1.5
Dimensions (H x W x D) 160 x 40 x 130 mm
(6.3 x 1.6 x 5.1 in)
Material
Housing Aluminum
Pressure dome PA PACM 12
Flow tube Glass
Weight
CS version approx. 500 g (1.1 lbs)
Rail-mounted device approx. 950 g (2.09 lbs)
Double flowmeter approx. 1200 g (2.65 lbs)
Classification Class IIa
as per EC Directive
93/42/EEC Annex IX
UMDNS code 11-748
Universal Medical Device
Nomenclature System –
Nomenclature for medical
devices
* 1 bar = 1 kPa x 100
** If flowmeter is used outside the specified ambient condi-
tions, see page 13.
15