Assembly; Operation; Switching On/Off; Nozzle Usage - Parkside PNTS 1300 D3 Manual De Instrucciones

All manuals and user guides at all-guides.com

Assembly

Pull out the mains plug.
This will prevent danger of injury
from electric shock.
The appliance is supplied with the
1. Attach the carrying handle
2
screws (2a) supplied.
2. Attach the feet (7) and secure the
feet using the cross-head screws
(7a) supplied.
( 15),
vacuuming,
Never vacuum
4. Place the motor housing (1) on
top of the dirt collector (6) and top of the dirt collector (6) and
close it
5. Connect the vacuum hose (13)
sories.

Operation

Fully unwind the suction hose (
13) before commencing work.

Switching on/off

Connect the mains plug.
Switching on the vacuum:
3) in position "I".
On/off switch (
Switching off the vacuum:
3) in position "O".
On/off switch (
16
16) for dry
17).
ithout a lter
with the clips (8).
-

Nozzle usage

Floor nozzle ( 18) with insert at-
tachment ( 19):
for wet and dry vacuuming of smooth sur-
Floor nozzle ( 18) without insert
attachment ( 19):
and for removing persistent dirt.
• Press the clips on the right and left side
the insert attachment (
Mind that sensitive surfaces might
get scratched if the insert attach-
ment is not used.
Crevice nozzle (
for vacuuming gaps, corners and radiators.

Wet vacuuming

1. For wet vacuuming or to vacuum wa-
basket (21).
- Before inserting, twist the edge of
2. Suctioning up (draining) water: place
the suction hose (
( 14) into the water tank and suc-
tion up the water.
3. Empty the waste container immediately
after vacuuming because it is not de-
signed to store liquids (see "Cleaning/
Maintenance").
Never reach into the water to
be suctioned up. Danger of
electric shock.
G B I E
18) and remove
19).
20):
15
15
13) on the handle
2 1