Overview; Delivery Contents; Assembly - Parkside PNTS 23 E Instrucciones De Utilización Y De Seguridad

Overview

Housing
1 Motor housing
2 Carrying handle
3 On/off switch
4 4 Pin ports for accessories
5 Suction connection
6 Stainless steel container
7 Drainage outlet
8a 2 feet with castors and accessory
fi ttings
8b 2 feet with wheels and accessory
fi ttings
9 Cable holder
10 Sealing clip
11 Blow connection
12 Mains power cable
13 Telescopic suction pipe
Accessories
14 Vacuum tube holder
15 Vacuum hose
16 Handle with air regulation
17 Air diffuser
Filter
18 Foam fi lter for wet vacuuming
19 Filter cover
20 Fluted fi lter for dry vacuuming
21 Paper fi lter bag for fi ne dust
Nozzles
22 Switchable household nozzle
for vacuuming carpets
for vacuuming smooth surfaces
23 Crevice nozzle

Delivery Contents

Unpack the equipment and check that it is
complete.
The equipment is supplied with the motor
head on (see no. 1).
To take off the motor head and remove the ac-
cessories, open the fi xing clips (see
All manuals and user guides at all-guides.com
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Dispose of the packaging material in a
proper manner.

Assembly

no. 10).
Motor housing
Carrying handle
Stainless steel container
2 feet with castors and accessory fi ttings
2 feet with wheels and accessory fi ttings
Telescopic suction pipe
Vacuum hose
Handle with air regulation
Air diffuser
Foam fi lter
Fluted fi lter + fi lter cover (already mounted)
Paper fi lter bag
Switchable household nozzle
Crevice nozzle
6 cross-head screws
Pull out the mains plug.
Danger of electric shock.
1. Screw on the carrying handle (2)
with the enclosed cross-head
screws.
2. Place the feet (8a+b) on the cas-
ing:
- The feet with the swivel castors
(8a) in the sockets on the front
of the container (6)
- The feet with the wheels (8b)
with the imprinted numbers
into the corresponding holes
on the back of the container (see
small picture above).
3. Attach the feet using the en-
closed cross-head screws.
4. Fit the motor head (1) onto the
stainless steel container (6) (see
picture ) and fi x it with the fi x-
ing clips (10).
5. Plug the air diffuser (17) into the blow
connection (11) (bayonet fi xing).
6. Fit the accessories:
GB MT
+
31