Control Panel - Ghibli & Wirbel S2 Uso Y Mantenimiento

6.1 CONTROL PANEL

(Fig. 8)
1) Suction unit activation switch
This switch can be enabled by turning
the key (2) to its "1" position.
With the switch in its "I" position, press
it down. The switch will light up and the
suction unit will activate.
2) Starter key
Turn the key to its "1" position to enable
the machine for function.
3a) Operating time indicator.
It indicates the machine's working hours.
3b) Battery charge status indicator.
This indicator lights up while the key is in
its "1" position and indicates the battery
charge status.
- When the green leds are on, the bat-
tery is fully charged.
- When the orange leds are on, the bat-
tery is, approximately, half charged.
- When the red led is on, the battery
charge is at the lowest level.
NOTE:
Do not use the machine when the last red
led is on but approach the battery charging
station.
4) Brush rotation enabling switch
This switch can be enabled by turning the
key (2) to its "1" position.
The button (4) turns on when pushed, al-
lowing the rotation of the brushes, which
are controlled by the levers (8).
3a
5
A
ENGLISH - 14
www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
9
3b
1
2
4
8
6
B
Fig. 8