Ghibli & Wirbel S2 Uso Y Mantenimiento página 61

www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
8.1.c - Using the machine
- After starting the machine and selecting a
cycle, start the cleaning operation by po-
sitioning the hands on the big handle (1)
and using the levers (2) to start traction.
N.B.:
To avoid damaging the floor, do not use the
machine in a fixed position with brush rota-
tion activated
N.B.:
The correct way of cleaning and drying the
floor is to move the machine forwards. Mov-
ing the machine backwards damages the
blades as well as not allowing correct aspira-
tion of the water present on the floor.
- If necessary, adjust the quantity of wash-
ing water using the tap (3).
- Check the status of the battery charge by
the indicator (4).
8.1.d - End of use and switching off
- Once the cleaning operations have been
completed, do not shut off the machine
immediately: use switches (5) and (6) to
deactivate water dispensing and brush
rotation and continue with the suction unit
in function in order to eliminate any re-
sidual liquid on the floor. When finished,
press the switch (7) to shut off the suction
unit.
- Lift up the floor squeegee (8) by lifting up
the lever (9), hooking it in the specific fix-
ing clip (10).
- Lift up the brush by pressing the pedal
(11) as far as it will go, fitting it in the des-
ignated slot.
WARNING:
Always lift up the squeegee at the end of
cleaning in order to prevent the deforma-
tion of the rubber blades.
- Turn the key (12) to its "0" position to shut
off the machine.
10
5 6
ENGLISH - 19
9
11
4
12
7
1
2
8
3
Fig. 12