Charging The Battery Using An External Battery Charge; Control Panel - Ghibli & Wirbel FR30 SM 45 TOUCH Manual De Uso Y Mantenimiento

www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
5.1.b - Charging the battery using an
external battery charger (Fig.
8)
WARNING:
It is important to first connect the plug (35)
to the socket (44) of the battery charger
and then connect the battery charger to
the mains socket, otherwise the batteries
will not charge.
- Move the machine close to the battery
charging station.
- Remove the battery plug (35) from the
system socket (39).
- Connect the battery plug (35) to the ex-
ternal battery charger socket (44).
- Once battery charging is complete, re-
connect the battery plug (35) to the sys-
tem socket (39).

6.1 CONTROL PANEL

(Fig. 9)
20) Sensor for starting brush/es rotation
Acting on the sensor (20), with the switch
(45) " " and the switch (52) "
serted, it starts the rotation of the brush
and the water supply.
45) Main switch "
Pressing the switch to "I", it inserts volt-
age to the circuits, enabling commands
and their switches.
To remove power to the circuits, repress
the switch.
46) Aspirator start switch "
The operation of the switch is enabled
from the switch (45) "
Press the switch (46) "
eration of the vacuum cleaner.
To turn off the fan, press the switch (46),
the turbine will continue to function for a
few seconds in order to aspirate the liq-
" in-
"
"
" in position "I".
", starts the op-
ENGLISH - 7
uid present on the floor, after which it will
turn off automatically
47) Switch for enabling the brush / sole-
noid
Press the switch (47), it enables the rota-
tion of the brush and the opening of the
solenoid valve; the operation of the same
is controlled by the sensor (20). To stop
the supply of water, close the tap (4).
4) Water quantity adjustment tap
- Turn the tap (4) counter-clockwise to
increase the quantity of water or turn it
clockwise to decrease it.
48) Status indicator battery discharge
Lights when the switch (45) is pressed,
indicating the charge status of the bat-
tery.
- When the LED (49) is illuminated, it in-
dicates that the battery charge status
is at maximum.
- When the LED (50) is illuminated, it in-
dicates that the battery charge status
is at about half.
- When the LED (51) is illuminated (red
LED), it indicates that the
charge status is at minimum.
With low battery (red LED (51) lit), the
machine turns off or does not start; it is
necessary to recharge the battery.
battery