Time And Date; Summer Time; Eco Mode; Temperature Units - Ferroli ECOTRONIC HiTech Manual Del Usuario

ECOTRONIC HiTech
Bleed duration
If the temperature on the collector probe increases by the specified value with "increment"
within one minute, the solar pump is activated for the set "bleed time" so that the medium to be
measured can move towards the collector probe. If Δt is not reached, a circulation pause of 5
minutes will be applied for the startup wizard function.
Increment
If the temperature in the collector reaches the defined value within one minute, the solar pump
is switched on for the duration of the bleed time.

6.15 Time and Date

Used to set the current time and date.
For time-dependent functions, such as circulation and anti-legionella and the eval-
uation of system data, the time must be accurately set on the controller. Note that
the clock continues to work for about 24 hours in case of a power outage, after
which it must be reset. An improper setting or an incorrect time can cause deletion,
incorrect storage or overwriting of data. The manufacturer declines any liability for
the stored data

6.16 Summer time

When this function is active, the controller clock automatically adjusts the summer time and
winter time.

6.17 Eco mode

When this function is active, the display backlight is automatically switched off if no button is
pressed for 2 minutes.
If there is a message, the backlight does not go off until the message has been
examined by the user.

6.18 Temperature units

°C and °F temperature units can be selected in this menu.
code 3542A420 - Rev. 00 - 12/2021
EN 175