Startup Wizard; Setup Wizard - Ferroli ECOTRONIC HiTech Manual Del Usuario

ECOTRONIC HiTech

STARTuP WIzARD

If the control unit is not configured, at start-up you will be asked to set the language. Then the
following screen will appear.

Setup wizard

Would you like to start the setup
wizard?
no
Select yes to proceed with the configuration or select No to ignore it.
The wizard helps the user in the necessary basic settings in the correct order. Each parameter
is explained on the control display. Press "esc" to return to the previous setting.
b) Without the startup wizard, the settings must be made in this order:
• menu 9. Language
• menu 3. Operating hours
• menu 4. Settings, all values
• menu 5. Protection functions, if needed
• menu 6. Special functions, if needed
In the Menu "Manual" operating mode, test the outputs of the switches with utilities connected
and check the probe values for plausibility. Then set to automatic mode. See "3. Operating
mode" on page 153.
This installation wizard is accessible at any time in menu 6.8..
Carefully consider the explanations for the individual parameters on the following
pages and check if further settings are required for the specific application.
yes
code 3542A420 - Rev. 00 - 12/2021
EN 151