Ferroli ECOTRONIC HiTech Manual Del Usuario página 146

» Place the bottom of the enclosure
in the desired position and mark the
three mounting holes.
» Make sure the wall surface is as
smooth as possible so that the con-
troller is not deformed when fasten-
ing the screws.
» Using a drill with 6 mm bit, make
three holes at the places marked on
the wall and insert the plugs.
» Insert the top screw and tighten a
little.
» Secure the upper part of the enclo-
sure and insert the other two screws.
» Align the enclosure and tighten the
three screws.
146 EN
code 3542A420 - Rev. 00 - 12/2021
ECOTRONIC HiTech
1
2
91
3