Programming; Display And Buttons - Ferroli ECOTRONIC HiTech Manual Del Usuario

ECOTRONIC HiTech

PROGRAMMING

Display and buttons

Circuit pump
(When active, the symbol rotates)
Valve (black flow direction)
Collector
Storage/buffer
Solid fuel boiler
Pool
On / Off thermostat
Temperature sensors
heat exchanger
Off external thermostat
Other symbols are available in the sec-
tion "Special functions"
Examples of button settings:
+/-
/
yes/No
Info
Back
Ok
Confirm
The display (1), with extended text and
graphic mode, is almost self-explanatory and
allows easy use of the controller.
The LED (2) lights up green when the pri-
mary pump is active (automatic mode). The
LED (2) lights up red when the "Off" operating
mode is set. The LED (2) blinks red rapidly
when an error is detected.
The commands occur via 4 buttons (3+4), to
which different functions are assigned, ac-
cording to the situation. The "esc" button (3)
is used to delete data or to exit a menu. If
applicable, a confirmation request will appear
to save the changes made.
code 3542A420 - Rev. 00 - 12/2021
Increase/decrease values
scroll menu up/down
confirm/cancel
additional Information
to previous screen
Confirm selection
Confirm setting
EN 149