Safety Instructions; Eu Declaration Of Conformity; General Instructions - Ferroli ECOTRONIC HiTech Manual Del Usuario

ECOTRONIC HiTech

SAFETy INSTRuCTIONS

Eu declaration of conformity

With the CE mark, the manufacturer declares that ECOTRONIC HiTech complies with the fol-
lowing safety directives:
• EC low voltage directive EU2014/35/EU
• EC electromagnetic compatibility directive 2014/30/EU
Conformity has been checked and the corresponding documentation together with the EC dec-
laration of conformity are filed with the manufacturer.

General instructions

Read carefully!
These installation and operating instructions contain basic instructions and important informa-
tion regarding safety, installation, startup, maintenance and optimum use of the unit. Therefore
the installation technician/personnel in charge and the system operator are required to read
and fully understand these instructions before installation, startup and operation of the unit.
Install the units only in dry areas and in the ambient conditions described in the "Specifications".
It is also necessary to observe the accident prevention regulations, the VDE provisions, the reg-
ulations of the local electricity company, the applicable DIN-EN standards and the instructions
for the installation and operation of additional system components.
Under no circumstances can the controller replace any safety device that the customer is re-
quired to install!
Installation, electrical connection, startup and maintenance of the unit must only be carried
out by qualified technicians. For users: Make sure the appropriate personnel provide detailed
information on operation of the controller. Always keep this documentation near the controller.
The manufacturer declines any liability for damage caused by improper use or failure to comply
with this manual.
code 3542A420 - Rev. 00 - 12/2021
EN 137