Date And Time Setting; Wifi Setting - Ferroli Connect CRP Manual De Instalacion Y Uso

5.9

DATE AND TImE SETTING

1. Follow the path
"MENU >> SETTINGS >> DISPLAY >> TIME & DATE"
2. Use the and
a. hours
3. Confirm the new values entered with the
It is possible to enable the summer time function for automatic switching from winter time to summer time.
To activate the "DAYLIGHT SAVINGS TIME" function:
a. Follow the path
"MENU >> SETTINGS >> DISPLAY >> DAYLIGHT SAVINGS TIME"
b. Use the and
c. Using the and

5.10 WIFI SETTING

NOTE To remotely manage the Connect CRP via the app "Ferroli CRP" it is necessary to have a WiFi network
with an Internet connection to which it can be connected.
To connect the device to the network, proceed as follows:
1. Follow the path:
"MENU >> SETTINGS >> WIFI >> AP MODE"
After pressing the
to the main screen and check that "AP" is present in the
"WIFI SIGNAL STRENGTH" area.
2. Read the MAC Address code on the data label affixed to the device and make a note of the last four characters.
3. From a cell phone with WiFi function activated, connect to the network called MilkyWay_XXXX where XXXX are
the last four characters of the MAC Address obtained from the previous point.
NOTE No password is required to access the network.
4. Access the page http://192.168.1.1. from browser.
5. In the SSID and Password field, enter the network information.
In the List box is the list of networks that the Connect CRP has identified. Press on a network and the
NOTE
SSID field will be automatically filled in with the name of the selected network.
6. Press on "CONFIGURE WIFI NETWORK (STA)" to
confirm the information entered.
buttons to change in sequence:
b. minutes
buttons to select "FUNCTION ACTIVE" and confirm with the
buttons select "CONFIRM" and press the button
button on "AP MODE", go back
fig. 57
cod. 3542B380 - Rev 00 - 05/2022
c. day
button.
d. month
button.
.
A P
1 2 : 1 9
M O D O
fig. 56
fig. 58
fig. 59
e. year
99
EN