Charging; Charging Times; Starting Charging; Charging Current Limiting - Porsche 7PP.971.675.AA Manual Del Usuario

Operation

Charging

Notes on charging
Vehicle charge port
For information on connecting and disconnecting the
vehicle cable to and from the vehicle charge port and
for the charging and connection status at the vehicle
charge port:
g See Owner's Manual.

Charging times

For information about the charging times:
g See Owner's Manual.
The charging duration can vary depending on the
following factors:
– Current-carrying capacity of the electrical socket
used
(domestic electrical socket or industrial electrical
outlet)
– Country-specific power grid voltage and current
– Settings for the charging current limit on the
control unit
– Fluctuations in the grid voltage
– Ambient temperature of vehicle and charger.
Charging times can be longer at temperatures at
the upper and lower extremes of the permitted
ambient temperature.
g Refer to chapter "Technical Data" on page 24.
– Temperature of the high-voltage battery and
control unit
– Passenger compartment precooling/heating ac-
tivated
16
Information
Due to different national power grid systems, various
cable variants are available. This may result in the
full charging performance not being available. Further
information is available from your authorized Porsche
dealer.
Charging
Electric shock, fire
DANGER
Risk of serious or fatal injury due to fire or electric
shock.
e
Always observe the specified sequence for the
charging process.
e
Do not disconnect the vehicle cable from the
vehicle charge port during the charging process.
e
End the charging process before disconnecting
the vehicle cable from the vehicle charge port.
e
Do not disconnect the charger from the electrical
socket during the charging process.
Possible errors are displayed by the light indicators
– (Fig. 2) by different colors, lights and flashing.
C
g Refer to chapter "Status displays and error mes-
sages of the control unit" on page 18.

Starting charging

1. Insert the plug into the electrical socket. All light
indicators briefly light up red.
2. Insert the vehicle plug in the vehicle charge port.
�� The light indicator of the On/Off button
lights up yellow.
After a successful self-test, all light indica-
tors light up green for 2 seconds.
For information on connecting the vehicle
cable to the vehicle charge port:
g See Owner's Manual.
3. Charging starts automatically.
�� The light indicator of the On/Off button
pulsates green.
Charging is controlled by the vehicle.
The charge status can be read in the vehicle.

Charging current limiting

The control unit detects the voltage and the available
current automatically. The charging current limiting
function can be used to set whether charging is car-
ried out with full or half charging power (100% or
50%). The last charging current set is saved. When
domestic electrical sockets are used the charging
current is automatically limited to 50% on delivery to
prevent overheating of the electrical installation.
Setting charging current limiting
A
e
Press the On/Off button for at least 2 sec-
onds.
�� After the charging current limit has been set
successfully, the light indicators
light up once green.
The set value (50% or 100%) is shown to
the left or right of the On/Off button
(Fig. 2)
B
.