Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operating Instructions
To pair the charger with your Porsche ID:
e Call up the website specified on the display on the
US
charger in the browser on your device and enter
the user code.
FC
– or –
e Scan the QR code displayed on the charger.
ESM
You can scan the QR code in the following ways:
– Using the Porsche Connect app (My Account
> Charging cables & devices > Scan QR code).
– Using the camera on your device (iOS® 11 or
higher, different for Android®).
– Using an app for scanning QR codes.
When the charger has been paired successfully,
the Setup assistant moves on to the next step.
Connecting to an energy manager
If an energy manager is available, it is possible to
establish a connection to it. The energy manager then
assumes control of the charging process.
e For instructions for connecting, refer to the
operating instructions for the energy manager.
If there is no energy manager available, the vehicle
will be charged at the charging current entered on
the charger (S
> A
ETTINGS
).
CURRENT
f Please see chapter "Adjust charging current" on
page 10.
Hotspot
If it is not possible to integrate into a home network,
the charger can activate a hotspot, thereby
establishing a connection to the web application on
the charger.
e To activate a hotspot, click on A
Once a hotspot has been activated, the symbol
will appear in the status bar.
10
Adjust charging current
The maximum permitted charging current for
the charger can be set here if there is no energy
manager available in the home network.
The maximum value displayed is set by the
electrician during installation of the Wall Charger
Connect.
e Set the charging current to the maximum value
available in the power grid used for the charger.
Use P
f Please see chapter "Charging Current Limiting"
on page 11.
Device protection
To prevent an unauthorized vehicle from being
connected to the charger, a PIN prompt can be
configured.
1. To activate the PIN prompt, select O
2. Enter a 4-digit PIN and confirm.
3. Enter the PIN again and confirm it.
Activation of the PIN prompt is confirmed.
Finishing the setup process
e Check the settings you entered using
DJUST CHARGING
S
UMMARY
Web Application
Further configuration options and detailed
information about the previous charging processes
can be displayed using a web application, which is
specific to each charger.
For information on the web application, refer to the
instructions at https://www.porsche.com/
.
CTIVATE HOTSPOT
international/aboutporsche/e-performance/
help-and-contact/
For other languages, select the desired country
version of the website.
and M
to do this.
LUS
INUS
.
N
and complete the installation.
Information
– Depending on which browser you are using,
the web application will not open immediately;
instead information about the browser's security
settings will be displayed first.
– Whether or not you will need to enter the network
key for calling up the web application depends on
the device's operating system.
Opening the web application via the hotspot
The web application can be called up using a device
(PC, tablet or smartphone) via a hotspot set up by the
charger.
To set up a hotspot:
f Please see chapter "Hotspot" on page 10.
e To call up the web application while a hotspot is
active, enter the following IP address in the
browser's address line: 192.168.0.1
Opening the web application via WiFi
The web application can be called up in the browser
on a device (PC, tablet or smartphone) that is logged
into the same home network as the charger.
e Enter the current IP address of the charger in the
browser's address line. You will find the current IP
address under S
> N
ETTINGS
ETWORK
N
.
ETWORK INFORMATION
– or –
e Enter the host name of the charger in the
browser's address line. You will find the host
name in the letter containing access data.
>
Capítulos
Tabla de contenido
