Selecting A Network; User Profiles (Pairing Porsche Id); Connect Energy Manager; Hotspot - Porsche Mobile Charger Connect Manual De Instrucciones

If an Internet connection with the charger cannot
be established, software updates can also be
downloaded manually via the web address in the
E-Performance area at https://www.porsche.com
and installed via the web application.

Selecting a Network

Select the option for connecting to a home network.
The option can be skipped with S
KIP
to a home network is established in this case.
When the charger is connected to an existing home
network, enhanced functions and information will
be available. The connection can be established via
WiFi or a Powerline Communication network
(PLC network).
If there is no home network available, a hotspot can
be set up on the charger.
Connection via WiFi
1. Select the W F option.
I I
2. Select the home network from the list of detected
WiFi networks.
3. Enter and confirm the password.
Connection via PLC pairing button
1. Select the PLC option.
PAIRING BUTTON
2. Start the connection setup process on the PLC
modem. Confirm by pressing OK on the charger.
Once the setup is connected, confirm with
C .
ONNECT
The connection to the PLC network is established.
If a connection to the PLC network is established,
the symbol will be displayed in the status bar.
Connection via PLC security code
A device on which the control software for the PLC
network is installed must be used for this method.
1. To establish a connection to a PLC network using
the security code, select PLC
The security code appears on the display.
2. Enter the security code in the relevant menu of
the control software for the PLC network in order
. No connection
to integrate the charger into the PLC network.
The connection to the PLC network is
established.
If a connection to the PLC network is established, the
symbol will be displayed in the status bar.

User Profiles (Pairing Porsche ID)

When the charger is paired to your Porsche ID,
information about the charger and the charging
processes can be displayed in My Porsche and in the
Porsche Connect app.
To pair the charger with your Porsche ID:
e Call up the website specified on the display on the
charger in the browser on your device and enter
the user code.
– or –
e Scan the QR code displayed on the charger.
You can scan the QR code in the following ways:
– Using the Porsche Connect app (My Account
> Charging cables & devices > Scan QR code).
– Using the camera on your device (iOS® 11 or
higher, different for Android®).
– Using an app for scanning QR codes.
When the charger has been paired successfully,
the Setup assistant moves on to the next step.

Connect Energy Manager

If an energy manager is available, it is possible to
establish a connection to it. The energy manager then
assumes control of the charging process.
e For instructions for connecting, refer to the
.
SECURITY CODE
operating instructions for the energy manager.
If there is no energy manager available, the vehicle
will be charged at the charging current entered on
the charger (S
).
CURRENT
f Please see chapter "Adapt Charging Current" on
page 11.

Hotspot

If it is not possible to integrate into a home network,
the charger can activate a hotspot, thereby
establishing a connection to the web application on
the charger.
e To activate a hotspot, click on A
Once a hotspot has been activated, the symbol
will appear in the status bar.

Adapt Charging Current

The maximum permitted charging current for the
charger can be set here if there is no energy manager
available in the home network.
The displayed maximum value is determined by the
types of cable that are connected.
e Set the charging current to the maximum value
available in the power grid used for the charger.
Use P
LUS
f Please see chapter "Charging Current Limiting"
on page 13.
Getting Started
> A
ETTINGS
DJUST CHARGING
CTIVATE HOTSPOT
and M to do this.
INUS
US
FC
ESM
PTB
TR
RU
UK
.
VIE
HE
AR
JPN
KOR
CHS
CHT
THA
11