3M Clean-Trace Manual Del Usuario página 15

(English)
to make and store new measurements ensure NEW RESULTS is highlighted and press Select.
It is now possible to name the Product using the cursor buttons to enter characters. the 3M clean-trace nG Luminometer retains the previously
entered name, either change or delete using the key.
use the navigation buttons and the Select key to enter the Product name.
When all characters have been entered and the Product name is correct, scroll up to highlight Done and press Select.
Note: It is only possible to name the product when new results is selected. If the set of results is re-opened as in section 5.03 and 5.04, the product
name cannot be entered or changed.
to make and store new measurements, use the navigation buttons to highlight the test point required and press Measure.
13