Measure Sample - 3M Clean-Trace Manual Del Usuario

(English)

4.0 MEASURE SAMPLE

4.01 What is MEASURE SAMPLE
MEASURE SAMPLE allows as many readings as required but does not store the data for later use. MeAsure sAMPLe does not require that the 3M
clean-trace Data trending software be loaded on the Pc.
NOTE: to store the data, refer to (section 4) ProGrAM MoDe and unPLAnneD MoDe.
4.02 How to Test Using MEASURE SAMPLE
turn the 3M clean-trace nG Luminometer on. When initialized the screen will display the MAIN MENU:
the cursor will be pointing at MEASURE SAMPLE. Insert a 3M test device into the 3M clean-trace nG Luminometer (see section 2.06):
Measuring samples
to measure a sample, press the green SELECT key. the screen will display the word MEASURING and after a five second delay a series of "count-up"
blocks will appear.
the screen will then display the result in relative Light units (rLu).
to measure another sample, remove the previous test, insert the next one and press the green Measure key.
When all measurements are completed press the back key to return to MAIN MENU.
10