Grounding Instructions; Intended Purpose - Porsche Mobile Charger Connect Manual De Instrucciones

Intended Purpose

if not installed and used in accordance with the
US
instructions, may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
FC
installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
ESM
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference
PTB
by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
TR
and receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is
RU
connected.
– Consult the dealer or an experienced radio/TV
UK
technician for help.
Changes or modifications not expressly approved by
the manufacturer could void the user's authority to
VIE
operate the equipment under FCC rules.
To comply with FCC RF exposure compliance
HE
requirements, the device must be installed to provide
a separation distance of at least 20 cm from all
persons.
AR
Observe the following instructions and
recommendations in order to ensure uninterrupted
JPN
charging with the charger:
– When installing the new electrical socket, select
an industrial electrical outlet with the highest
KOR
possible power available (adapted to the domestic
electrical installation) and have it commissioned
by a qualified electrician. Porsche recommends
CHS
that you use a certified Porsche service partner.
– Where technically possible and legally
CHT
permissible, the electrical installation must be
dimensioned in such a way that the maximum
nominal power of the electrical socket used is
THA
available for charging the vehicle.
4
– Before installation, check that the necessary
power for charging a vehicle can be continuously
provided by the currently available domestic
installation. Protect the domestic installation with
an energy management system, if necessary.
– If you are unsure about the electrical domestic
installation, have it checked by a qualified
electrician. Porsche recommends that you use a
certified Porsche service partner.
– If you intend to use the charger with a
photovoltaic system, contact an authorized
Porsche dealer.
– In order to fully exploit the performance of the
charger and to ensure fast vehicle charging, use
either NEMA electrical sockets with the highest
possible current rating appropriate for the power
plug or industrial electrical outlets according
to IEC 60309.
– When charging the high-voltage battery via the
domestic electrical outlet/industrial electrical
outlet, the electrical installation may be loaded to
its maximum capacity. Porsche recommends that
you have the electrical installations used for
charging checked regularly by a qualified
electrician. Ask a qualified electrician which
inspection intervals are appropriate for your
installation. Porsche recommends that you use a
certified Porsche service partner.
– On delivery, the charging current is automatically
limited to prevent overheating of the electrical
installation. Get a qualified electrician to
commission the charger and set the charging
current limit as required for the domestic
installation.
f Please see chapter "Charging Current
Limiting" on page 13.

Grounding Instructions

Charger must be grounded.
If it should malfunction or break down, grounding
provides a path of least resistance for electric current
to reduce the risk of electric shock.
The charger is equipped with a cord having an
equipment grounding conductor and a grounding
plug. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Electric shock, short
WARNING
circuit
Improper connection of the equipment-grounding
conductor may result in a risk of electric shock.
e Check with a qualified electrician or serviceman if
you are in doubt as to whether the product is
properly grounded.
e Do not modify the plug provided with the product
- if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
Intended Purpose
Charger with integrated control and protection for
mode 2 charging for vehicles with high-voltage
battery that meet the generally applicable standards
and directives for electric vehicles.
e Always use the appropriate device version for the
regional power grid.
f Please see chapter "Technical Data" on
page 17.
The charger may only be used as a combined unit
consisting of supply cable, control unit and vehicle
cable.