Pausing Charging; Stopping Charging; Charging Current Limiting; Charging Times - Porsche Mobile Charger Connect Manual De Instrucciones

4. After a few minutes, the display switches to
standby mode.
The vehicle is charging.
Information
– Charging is controlled by the vehicle. The charging
process can only be stopped at the vehicle.
– The charge status is shown on the display
provided the charger is not in standby mode.
The display can be switched on again by pressing
the Power button .
– A high-temperature switch-off feature prevents
overheating while charging.

Pausing Charging

Charging is controlled by the vehicle and may
occasionally be paused, e.g. in order to optimize
power consumption.
When charging is paused, this will be indicated on the
control unit:
Power button lights up white.
Status LEDs flash blue.
The display switches on.
The vehicle starts charging again automatically.
The charging process can be stopped at the vehicle.

Stopping Charging

b Charging was completed successfully.
Power button lights up white.
Status LEDs light up green
The display switches on and shows information
about the completed charging process. After a
few minutes, the charger switches to standby
mode.
e Disconnect the vehicle plug from the vehicle
charge port.

Charging Current Limiting

The control unit detects the voltage and the available
current automatically.
The power to be used for charging can be set using
charging current limiting. The last charging current
set is saved.
On delivery, the charging current is automatically
limited to 50% to prevent overheating of the
electrical installation.
If the charger is connected to an energy manager,
the energy manager limits the charging current in
accordance with the values set in the energy
manager.
The maximum available charging current can also be
reduced by other consumers in the home network,
e.g. by an electric heater or water heater.
The charging power must never be set higher than
the maximum available power of the electrical circuit
used. If you are unsure about this, contact a qualified
electrician.

Charging Times

The charging duration can vary depending on the
following factors:
– Electrical socket used (domestic electrical outlet
or industrial electrical outlet)
– Country-specific power grid voltage and current
– Settings for limiting the charging current on the
charger
– Fluctuations in the grid voltage
– Ambient temperature of vehicle and charger.
Charging times can be longer at temperatures at
the upper and lower extremes of the permitted
ambient temperature.
f Please see chapter "Technical Data" on
page 17.
Charging Current Limiting
– Temperature of the high-voltage battery and
control unit
– Passenger compartment precooling/heating
activated
– Current-carrying capacity of the power plug
and vehicle plug
Information
Due to different national power grid systems, various
cable variants are available. This may result in the full
charging performance not being available. Further
information is available from your Porsche partner.

Malfunctions

Fig. 9: Display in the event of malfunctions
A Status LEDs light up red
B Error message and cause
C Remedy
US
FC
ESM
PTB
TR
RU
UK
VIE
HE
AR
JPN
KOR
CHS
CHT
THA
13