Moving And Storage Instructions; Transport; Basic Wall Mount; Attaching The Control Unit To The Basic Wall Mount - Porsche Mobile Charger Connect Manual De Instrucciones

Ocultar thumbs Ver también para Mobile Charger Connect:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
Moving and Storage
Instructions
Do not lift, carry or move the charger by the supply
cable, vehicle cable, power plug or vehicle plug.
Always lift, carry and move the whole device. Do not
damage the control unit, the cables or plugs when
moving, for example by dragging over the floor or
sharp edges.
Proper storage: Store in a cool dry place away from
direct sunlight: not below –22 °F (–30 °C) or above
+122 °F (+50 °C).

Transport

Unsecured load
WARNING
An unsecured, incorrectly secured or incorrectly
positioned charger can slip out of place and endanger
occupants when braking, accelerating, changing
direction or in the event of an accident.
e Never transport the charger unsecured.
e Always transport the charger in the luggage
compartment, never in the passenger
compartment (e.g. on or in front of the seats).
Securing the charger during transport
The charger is supplied with or without a transport
case, depending on vehicle type.
e If a transport case is supplied: Always stow and
transport the charger in the case. Attach the case
to the front and rear tie-down rings with hooks.
For information on the tie-down rings in the
luggage compartment:
f See Owner's Manual.
e If a transport case is not supplied: Stow the
charger in the rear luggage compartment while
transporting it.
e Depending on the vehicle type, stow the charger
in such a way that it does not endanger any
occupants in dangerous situations.

Basic Wall Mount

Attaching the Control Unit to the
Basic Wall Mount
Fig. 10: Attaching the control unit
1. Guide the vehicle cable through the lower
opening in the basic wall mount, fit the bottom of
the control unit on the locking lug and engage it
by pushing it to the rear.
2. Guide the supply cable through the upper
opening in the basic wall mount and lock the snap
ring by pushing it to the left.
3. Insert the vehicle plug into the plug holder.

Moving and Storage Instructions

Charging Dock

Fig. 11: Charging dock

Opening the Charging Dock

e Press the door of the charging dock in the
direction of the arrow.
The door opens automatically.

Closing the Charging Dock

e Close the door of the charging dock and press in
the direction of the arrow.

Locking the Charging Dock

e Turn the lock into position A.

Unlocking the Charging Dock

e Press the lock into position B.
US
FC
ESM
PTB
TR
RU
UK
VIE
HE
AR
JPN
KOR
CHS
CHT
THA
15
Tabla de contenido
loading

Tabla de contenido