Messages On The Vpap Auto Lcd - ResMed VPAP Auto Guia Del Usuario

Table 3: Settings for mask types
Settings
ACTIVA
SWIFT
STANDARD

Messages on the VPAP Auto LCD

Your clinician may have set your VPAP Auto to remind you about important
events, such as when to replace your mask, when to insert your Data Card (if
your device is Data Card enabled) and so on.
The reminder message is displayed on the LCD and is visible if the device is not
delivering therapy. The backlight on the LCD flashes when a message is
displayed.
Your clinician can set any of the following reminders on your LCD:
Message
INSERT CARD
REPLACE
MASK
CALL
PROVIDER
REPLACE
FILTER
Mask
Mirage Activa Nasal Mask
Mirage Swift Nasal Pillows System
Mirage Swift II Nasal Pillows System
Mirage Vista Nasal Mask
Description
May appear if your
device is Data Card
enabled.
May appear when
your mask is due
for replacement.
May appear as a
reminder to
contact your
clinician; for
example to discuss
how your therapy
is going.
May appear as a
reminder to
replace the air filter
on your device.
Action
Insert your Data Card (see Section H of the
illustrations sheet) and follow any instructions
that your clinician has given you. When you
have done this, the message will disappear
from the LCD. Pressing the Left (Ok) key will
also remove the message.
Press the Left (Ok) key to remove the
message from your LCD, and replace your
mask with a new one.
Press the Left (Ok) key to remove the
message from your LCD, and contact your
clinician.
Press the Left (Ok) key to remove the
message from your LCD, and replace the air
filter.
Operating Instructions 17