Guidance And Manufacturer's Declaration-Electromagnetic Emissions And Immunity - ResMed VPAP Auto Guia Del Usuario

Guidance and Manufacturer's Declaration—Electromagnetic
Emissions and Immunity
Guidance and manufacturer's declaration—electromagnetic emissions
The VPAP Auto device is intended for use in the electromagnetic environment specified below. The
customer or the user of the VPAP Auto device should assure that the device is used in such an
environment.
Emissions test
RF emissions CISPR11
RF emissions CISPR 11 with
serial adapter
RF emissions CISPR 11 with
USB adapter
Harmonic Emissions
IEC 61000-3-2
Voltage Fluctuations/Flicker
Emissions IEC 61000-3-3
* Class B for all system configurations except when a ResLink with oximeter is attached to a VPAP
Auto device powered from a DC-12 adapter, in which case the system is Class A compliant. Class A
is suitable for use in all establishments other than domestic and those directly connected to a low
voltage power supply network which supplies buildings used for domestic purposes.
Medical Electrical Equipment needs special precautions regarding EMC and needs to be installed
and put into service according to EMC information provided in this document.
Warnings: The VPAP Auto device should not be used adjacent to or stacked with other equipment.
If adjacent or stacked use is necessary, the VPAP Auto device should be observed to verify normal
operation in the configuration in which it will be used.
The use of accessories (eg humidifiers) other than those specified in this manual is not
recommended. They may result in increased emissions or decreased immunity of the VPAP Auto
device.
Electromagnetic
Compliance
environment—guidance
Group 1 The VPAP Auto device uses RF energy
only for its internal function.
Therefore, its RF emissions are very
low and are not likely to cause any
interference in nearby electronic
equipment.
Class B* The VPAP Auto device is suitable for
use in all establishments, including
domestic establishments and those
Class B directly connected to the public low-
voltage network that supplies
buildings used for domestic purposes.
Class A
Complies
Technical Specifications 31