ResMed VPAP Auto Guia Del Usuario página 22

Note: Make sure that the mask setting on the MASK screen is the same as the
mask you are using.
To use the mask-fitting feature:
1
Fit your mask as described in the mask user instructions.
2
Hold down the Start/Stop key for at least three seconds until air pressure
delivery starts.
The following display will appear on the LCD screen indicating that the mask-
fitting feature is operating. Your device will ramp to the mask-fit pressure and will
remain at this pressure for three minutes.
The LCD also displays a mask-fit star rating. See Table 2.
Notes:
The mask-fit star rating display disappears after three minutes.
•
The mask-fitting feature can only be started from the RAMP or SETTLING
•
screen.
When the device is in VAuto mode, the mask-fit pressure is 10 cm H
•
When the device is in CPAP mode, the mask-fit pressure is the set treatment
pressure or 10 cm H
the mask-fit pressure is EPAP or 10 cm H
Leak Alert and SmartStop functions are disabled while using Mask Fit.
•
3
Adjust your mask, mask cushion and headgear until you have a secure and
comfortable fit.
Once you have a secure and comfortable fit, check your mask-fit star rating on
the LCD screen. Table 2 explains the mask-fit star ratings.
Note: If there is another person nearby to check your mask-fit star rating, you
can adjust your mask, mask cushion and headgear while lying down.
Table 2: Definitions of Mask-Fit Star Rating
Star rating
*****
****-
***--
**---
*----
-----
14
MASK FIT:
*****
excelnt
O, whichever is greater. When the device is in S mode,
2
Definition
Excellent
Very good
Good
Adjust mask
Adjust mask
Adjust mask
mask-fit star rating
O, whichever is greater.
2
O.
2