How To Change The Language Setting; Messages On The S8 Escape Ii Lcd - ResMed S8 Escape II Guia Del Usuario

1. On the standby (RAMP) screen, press
2. Press until you see EPR LEVEL, then press
3. Press or
4. Press (Apply) to save the setting.

How to change the language setting

1. On the standby (Ramp) screen, press
2. Press until you see LANG (Language), then press
3. Press or
4. Press (Apply) to save the new language.

Messages on the S8 Escape II LCD

Your clinician may have set your S8 Escape II to remind you about important
events, such as when to replace your mask, when to insert your Data Card (if
your device is Data Card enabled) and so on.
The reminder message is displayed on the LCD and is visible if the device is not
delivering therapy. The backlight on the LCD flashes when a message is
displayed.
Your clinician can set any of the following reminders on your LCD:
Message Description
INSERT May appear if your
CARD device is Data Card
enabled.
REPLACE May appear when
MASK your mask is due for
replacement.
CALL May appear as a
PROVIDER reminder to contact
your clinician, eg, to
discuss how your
therapy is going.
REPLACE May appear as a
FILTER reminder to replace
the air filter on your
device.
SERVICE May appear as a
DUE reminder to return
your device for
service.
until you see the setting that you require.
until you see the language that you require.
Action
Insert your Data Card and follow any
instructions that your clinician has given you.
When you have done this, the message will
disappear from the LCD. Pressing
will also remove the message.
Press
your LCD, and replace your mask with a new
one.
Press
your LCD, and contact your clinician.
Press
your LCD, and replace the air filter.
Press
your LCD, and contact your clinician.
.
(Change).
(Menu).
(Change).
(Ok) to remove the message from
(Ok) to remove the message from
(Ok) to remove the message from
(Ok) to remove the message from
Using the S8 Escape II
(Ok)
7