Message
SERVICE DUE
Customized
messages
Modules
Note: Do not remove modules while power is connected to the VPAP Auto.
Your VPAP Auto will have one of two modules fitted to the back: a blank
module or a ResScan Data Card module.
Using a Blank Module
Please refer to the illustrations in section F of the illustration sheet.
The blank module is a protective cover on your VPAP Auto. At times, you may
wish to remove or attach the module, for example to use another module.
To remove the blank module, pull it off the back of the VPAP Auto to show the
data communications port (F-1).
To attach the blank module, push the blank module onto the data
communications port, until the module clicks into place (F-2).
Note: To protect the data communications port, always ensure there is a
module attached to the back of the device.
Using a ResScan Data Card Module
Please refer to the illustrations in section G of the illustration sheet.
The ResScan Data Card module is an accessory to the VPAP Auto. Use a
ResScan Data Card with the Data Card module to collect data and update
settings in the VPAP Auto. The module and card give your clinician convenient
access to data about your treatment, and can provide you with new device
settings from your clinician without your having to leave home.
Attaching the Module
To attach the Data Card module, push it onto the data communications port at
the back of your VPAP Auto until it clicks into place (G-1).
Removing the Module
To remove the Data Card module, pull it off the back of the VPAP Auto (G-2).
18
Description
May appear as a
reminder to return
your device for
service.
Your clinician may
also set reminders
for other reasons;
for example to
return equipment
or to call a
particular person
or number.
Action
Press the Left (Ok) key to remove the
message from your LCD.
Press the Left (Ok) key to remove the
message from your LCD.