ResMed VPAP Auto Guia Del Usuario página 20

Menus with a Humidifier
If the HumidAire 3i is connected to the VPAP Auto, and treatment has not
commenced, the VPAP Auto will display one of the following screens:
(shows RAMP setting)
Figure 3: Patient Menu display with humidifier: prior to starting treatment
After treatment starts, the treatment screen displays (see Figure 5, Treatment
screens (all modes), on page 15).
Menus with a ResLink and Oximeter
If your clinician has recommended that you use a ResLink module, and the
ResLink and an oximeter are connected to the VPAP Auto, then display of SpO
(oxygen saturation) and HR (heart rate) takes priority. If treatment has not
commenced, the VPAP Auto will display one of the following screens, whether
a humidifier is connected or not:
Prior to starting treatment:
SpO2 : 98%
menu
Max Ramp off
Max Settle off
Figure 4: Menu display with ResLink and oximeter
Accessing the Menus
To navigate and make selections within the Patient Menu, use:
the Up/Down key to scroll through items within a level
•
the Left key to enter a submenu and to apply an option choice
•
the Right key to navigate out of a menu or submenu and to exit without
•
changing options.
Oxygen saturation (SpO2): The saturation of blood hemoglobin (%).
Heart rate (HR): The number of heartbeats in a 60-second time frame (beats per
minute).
12
RAMP : 20min
menu warmup
CPAP and S modes
HR : 60
or
SETTLE : 20min
menu
VAuto mode
(shows SETTLING setting)
RAMP: 20min 98%
menu HR: 60
Max Ramp set
to non-zero value
warmup
SETTLE: 20min 98%
menu HR: 60
Max Settle set
to non-zero value
2