en
Citrus press
9. Only use the pusher provided to add food.
10. When you have finished processing,
or when the processed food almost
reaches the underside of the cutting
disc, turn the rotary switch to y and
wait for the drive to come to a standstill.
Disconnect the mains plug.
11. Rotate the universal mixer in an anti
clockwise direction and remove.
12. Rotate the lid in an anticlockwise direc
tion and remove.
13. Remove the cutting disc and tool holder.
14. Empty the container.
■ Clean all parts directly after use.
X "Cleaning and maintenance" see
page 14
Citrus press
For squeezing juice out of citrus fruits, such
as lemons, oranges and grapefruits.
Caution!
Finish processing and empty the container
before the squeezed juice reaches the
underside of the filter.
Use
X Image sequence D
Important: Only prepare the base unit as
described in the main operating instructions.
1. Place the tool holder on the support in
the container and press down.
2. Fit the filter (,).
3. Rotate the filter in a clockwise direction
as far as possible (;). The catch lock
must be in full contact with the handle of
the container.
4. Place the pressing cone on the tool
holder and press down.
5. Position the universal mixer as shown on
the front yellow drive and press down.
6. Rotate the universal mixer in a clock
wise direction as far as possible.
7. Plug the mains plug into the mains.
Turn the rotary switch to the recom
mended speed.
8. Press one half of the citrus fruit down on
the pressing cone. The juice will run into
the container.
14
9. When you have finished processing, or
when the squeezed juice food almost
reaches the underside of the filter, turn
the rotary switch to y and wait for
the appliance to come to a standstill.
Disconnect the mains plug.
10. Rotate the universal mixer in an anti
clockwise direction and remove.
11. Remove the pressing cone.
12. Rotate the filter in an anticlockwise
direction and remove.
13. Remove the tool holder.
14. Empty the container.
■ Clean all parts directly after use.
X "Cleaning and maintenance" see
page 14
Cleaning and maintenance
The attachments and accessories used
must be thoroughly cleaned after each use.
W Risk of injury
– Do not touch the blades of the universal
blade with bare hands. To clean the
universal blade, grasp by the plastic
only. When not in use, always store
the universal blade in the blade guard.
Clean with a brush.
– Do not grasp the sharp blades or edges
of the cutting discs. Grasp the discs by
the plastic part in the centre only.
Caution!
– Do not use any cleaning agents contain
ing alcohol or spirits.
– Do not use any sharp, pointed or metal
objects.
– Do not use abrasive cloths or cleaning
agents.
– Do not wedge plastic parts in the
dishwasher as they could become
permanently deformed.
In Fig. E you will find a summary of how to
clean the individual parts.
Note: when processing food such as
carrots, the plastic parts may become
discoloured, but this can be removed with a
few drops of cooking oil.