Redmond RMC-M90E Manual De Usuario página 11

When the automatic program is selected and the temperature and cooking time are adjusted, you may set the Time Delay.
1. Press Time Delay button to enter the Time Delay setting mode. The words Time Delay are displayed. Timer is blinking.
2. Press Hour button repeatedly to adjust the hours in 24 hour format. Hold the button down to scroll through the digits.
3. Press Min button repeatedly to adjust the minutes. Hold the button down to scroll through the digits.
4. If you need to set the delay of less than 1 hour, repeatedly press Hour button to reset to zero and adjust the minutes
using Min button.
5. To cancel the settings press Reheat/Cancel button and reset.
6. When the time is set press and hold down the Start button. Time Delay function indicator lights up. Set program starts
running and the countdown begins.
7. Your meal will be ready when the time set expires. When the program finishes, the device automatically switches to
Keep Warm (Reheat/Cancel button indicator lights up).
8. Press Reheat/Cancel button to cancel the Keep Warm. Button indicator goes off.
Time Delay function is available in all automatic programs except FRY, PASTA and QUICK COOK.
It is not recommended to use Time Delay function if dairy and other perishable products are being used (eggs, fresh milk, meat,
cheese etc.).
Setting the Time Delay in STEAM program remember that the countdown starts only when the device reaches its operating
temperature (water comes to a full boil).
Keep Warm Function
Function is being automatically activated at the end of the cooking program. When the program finishes, the temperature of
the meal (70–75°C) is being maintained for a period of time up to 24 hours.
Reheat/Cancel button indicator lights up and the Keep Warm count up is being displayed.
Press and hold down Reheat/Cancel button to disable the function.
Disabling The Keep Warm In Advance
Automatic activation of the Keep Warm function at the end of the program may sometimes be undesirable. REDMOND RMC-
M90E allows disabling the function in advance, while setting the program or during its operation. Press and hold down the
Menu / Keep Warm button to cancel the function. Reheat/Cancel button indicator goes off. To reactivate the function, repress
and hold down the Menu / Keep Warm button (Reheat/Cancel button indicator goes off).
Reheat Function
REDMOND RMC-M90E can be used for warming up cold meals. To reheat:
1. Put the products into the bowl. Place the bowl inside the device.
2. Close the lid until it clicks into place and plug in the unit.
3. Press and hold down Reheat/Cancel button for a few seconds until an audible sound is produced. Corresponding indica-
tors light up and reheating process begins. The timer starts its countdown.
The meal will be warmed up to 70–75°C and the temperature will be maintained for the next 24 hours. To cancel the func-
tion press and hold down Reheat/Cancel button. Corresponding indicators go off.
The function may operate for a period of 24 hours, however, we recommend using it moderately, because a prolonged thermal
exposure may sometimes affect flavor characteristics of the meal.
Standard Operating Procedure for Automatic Programs
IMPORTANT! When using the water boiling device (for example, when boiling products), DO NOT set the cooking temperature
above 100°C. It may result in overheating and failure of the device. For the same reason, DO NOT use the BREAD, FRY and
BAKE programs to boil water.
1. Measure the ingredients according to the recipe.
2. Put them into the bowl. Make sure that all the ingredients including liquid are below the scale mark indicating maximum
capacity. Place the bowl inside the device. The bowl and the heating element must fit tightly.
Use only the bowl supplied or compatible with this model when using the multicooker. See www.redmond.company for compat-
ible bowls. DO NOT use any other utensils!
DO NOT process food directly in the bowl! This may damage the non-stick coating, deform the bowl and damage the appliance.
3. Close the lid until it clicks into place. Plug in the unit.
ATTENTION! If you cook at high temperatures with much vegetable oil, always leave the device lid open.
4. Repeatedly press "Menu/Keep Warm" button to select the program (corresponding indicator lights up).
5. Use Hour and Min buttons to adjust the time set by default for each program.
6. Set Time Delay function if needed. Time Delay function is not available in FRY, PASTA and QUICK COOK programs.
7. Press and hold down Start button. Start and Reheat/Cancel button indicators light up. Set program starts running and
the countdown begins. Countdown of the STEAM program begins only when water comes to a full boil, providing enough
steam. In PASTA — after water comes to a full boil, products are added and Start button is being repressed.
8. Press and hold down Menu / Keep Warm button to disable the Keep Warm function in advance if needed (Reheat/
Cancel button indicator goes off). Repress Menu/Keep Warm button to reactivate the function. Keep Warm function is
not available in YOGURT/DOUGH and BREAD programs.
9. When cooking time expires, the device makes an audible sound. Depending on your settings the unit either switches
to Keep Warm (Reheat/Cancel button indicator lights up) or enters standby mode (Start button indicator blinks).
10. To interrupt cooking process at any stage, to cancel set program or the Keep Warm function press and hold down Reheat/
Cancel button.
For high-quality results, you are offered to use the recipes for cooking from the cook book supplied with REDMOND multi-
cooker RMC-M90E, designed specifically for this model.
If the expected result has not been achieved, refer to the Cooking Tips section, where you can find answers to the most fre-
quently asked questions and get the necessary recommendations.
If you did not achieve the desired result using automatic programs, try versatile program called MULTI COOK, featuring a wide
time and temperature adjustment range. This program gives endless opportunities for new culinary experiments.
MULTI COOK Program
This program can be used to cook any meal with your personal time and temperature settings. REDMOND RMC-M90E, featur-
ing MULTI COOK program will be able to replace a big number of kitchen appliances. Now any recipe, either from your
family cookbook or Internet, can be adjusted for your multicooker.
For your convenience, the device does not switch to Keep Warm automatically by the end of the program if the cooking
temperature was less than 80°C. It may be manually reactivated by pressing and holding down the Menu/Keep Warm button
right after the program starts running. Reheat/Cancel button indicator lights up.
Temperature adjustment range (use Temperature button to adjust) is from 35°C to 170°C with 5°C intervals.
Cooking time adjustment range is from 5 minutes to 12 hours with the following intervals: less than 1 hour — 1 minute, over
an hour — 5 minutes.
If you use the MULTI COOK program for boiling the water (for example, when cooking products), it is FORBIDDEN to set the
cooking temperature above 100°C.
OATMEAL Program
This program is recommended for cooking various porridges using milk. Program's default time is 10 minutes. Manual time
adjustment is available. Time adjustment range is from 5 minutes to 1.5 hours with 1 minute intervals.
OATMEAL program is recommended for cooking various oat porridges using pasteurized low fat milk. To avoid boiling away,
we recommend you do the following:
• rinse grain thoroughly before cooking;
• grease the sides of the bowl with butter;
• follow proportions suggested in the recipe book. Increase or reduce amount of ingredients proportionally;
• using whole milk dilute it by half with water.
Cooking results may vary depending on the place of origin and the manufacturer of the products used.
If you did not manage to achieve the desired result, please consult the chapter "Cooking Tips" to receive necessary recom-
mendations on cooking or use the multifunctional program MULTI COOK. Set the temperature of 95°C. Follow the proportions
and cooking time settings given in the recipe.
STEAM Program
This program is recommended for steaming meat, fish, vegetablesе and children meals. Program's default time is 15 minutes.
Manual time adjustment is available. Cooking time adjustment range is from 5 minutes to 2 hours with 5 minute intervals.
Use the steaming container provided to steam the foods.
1. Pour 600–1000 ml of water into the bowl. Place the steaming container in.
RMC-M90E GBR
11