Circuit - Panasonic MINAS A6 Multi Serie Referencia Técnica

5.6 Circuit

5.6 Circuit
The assignments in Functional Scheme are achieved by linking the input and output connectors of the
functional modules.
An output of a module can, if necessary, be connected several times to inputs of other modules, but an input
may only be assigned once. In addition, certain module groups cannot be connected to one another for
technical reasons. If the connection is invalid, the program displays a warning.
Only rectangular control points can be created, i.e. the connection lines always run horizontally or vertically.
Creation of the connection
1. Press the left mouse button to select a start connector.
2. The user can influence the connection history by clicking in a free area.
3. A second click selects the destination connector.
•
Connections can only be selected with the mouse and be deleted with Delete key.
•
If all connections of a module are to be deleted, then the corresponding function block can
be deleted. The connected connections are automatically deleted in this case.
•
The program automatically creates a new connection in the connection or circuit diagram.
The program records the connection by inserting additional control points (breakpoints)
based on a bisection algorithm.
•
The graphical representation can be adapted and the general representation can be
optimized by moving the function blocks (if the automatic arrangement has been
deactivated). In complex diagrams, a connection line may cross a function block. This has
no effect on the internal function of the connection.
•
The connection is not created automatically in all plans.
Drawing custom link lines is also supported. These will remain until the displacement of a
connected function block forces the recalculation of the control points (see "Arrange"
button).
5-13