Instructions for use
Hours setting
Lights corresponding to 1 to 10 incubation/reading
positions indicate the digit value which is set. Lights
from 1 to 9 indicate digit value from 1 to 9. Light 10
indicates 0 value.
In time setting mode, light 1 from PRO sector will turn
on to indicate ten hour modification and incubation
light corresponding to the 10th position will turn on to
indicate setting started.
NOTE: 24-hour format.
To change hours and minutes digits, use
buttons. To increase digit value press
and
; to decrease press
Figure 5
Increase
- Hours setting: Ten hours (Hh:mm)
The blue light number 1 corresponding to PRO sector
should be on. If any other light from PRO sector is on,
press
button as many times as necessary to
turn on the blue light number 1. This indicates ten
hour setting.
To increase ten hours value, press
duce ten hours value, press
NOTE: the possible values for ten hour are 0, 1 and 2.
(see Figure 5).
Decrease
button. To re-
button. (See Figure 5).
IC10/20FR Page 13
- Hours setting: Unit hours (hH:mm)
Press
button to turn on the blue light num-
ber 2. This indicates unit hours setting. If any other li-
ght from PRO sector is on, press
many times as necessary to turn on the blue light
number 2.
To increase unit hours value, press
crease unit hours value, press
Minutes setting
- Minutes setting: Ten minutes (hh:Mm)
Press
button to turn on the blue light number
3. This indicates ten minutes setting. If any other light
from PRO sector is on, press
times as necessary to turn on the blue light number 3.
To increase ten minutes value, press
decrease ten minutes value, press
gure 5).
NOTE: possible values for ten minutes are 0, 1, 2, 3,
4 y 5.
- Minutes setting: Unit minutes (hh:mM)
Press
button to turn on the blue light num-
ber 4. This indicates unit minutes setting. If any other
light from Pro sector is on, press
many times as necessary to turn on the blue light
number 4.
button as
button. To de-
button. (See Figure 5).
button as many
button. To
button. (See Fi-
button as