Urrea SM1010 Manual De Usuario Y Garantía página 37

Letter stamp
on top edge
• Turn all panels upside down to perform base
assembly.
• Attach one corner of left panel (stamped 'B')
to front panel A.
• Attach the other corner of left panel B to rear
panel A.
• Repeat above two steps for attachment of
right panel (stamped 'C').
A
C
ASSEMBLE CASTER SETS
Tools Required: Two 1⁄2" Open End Wrenches
Kick Plate cam
Loosen and remove the bolt and hex nut from
the bracket
B
A
Foot Pedal Bar
Bracket
E N G L I S H •
• Rotate foot pedal bar so that kick plate cam is
inside Kick plate Cams Inside the Brackets.
• The kick plate cam must be underneath the
caster to function properly.
• Place caster onto the bracket and secure in
position with bolt and hex nut.
• Repeat above steps for the second caster set.
ATTACH CASTER SETS TO BASE
Tools Required: 5mm Hex Wrench
Hardware Required: Eight M8 x 16 socket pan
head screws (Hardware bag #4).
• Attach one caster set to the two front corner
supports using four M8 x 16 socket pan head
screws.
• Attach the remaining caster set to the two
rear corner supports.
U se r's m a n ua l
37