Tabla de contenido
When
Monthly
Tools
Adjustable wrench,
flatblade screwdriver
12. Repeat the rinsing procedure in Step 11 with a fresh, clean, damp grill cloth to
ensure all cleaner and soil are removed from platens.
13. Wipe remaining parts of the toaster with a clean damp cloth.
14. Take bun tray platform, bun board, and aluminum plate to back sink. Scrub with
a pot brush or No-Scratch Pad in a solution of McD All Purpose Concentrate.
Do not use abrasive pads. Rinse parts under running water and let air dry.
Tighten Platen and Leg Bolts
TIGHTEN PLATEN BOLTS
1. Turn the power switch to the OFF Position.
2. Unplug the power cord.
3. Allow toaster to cool before proceeding.
4. Using an adjustable wrench, tighten the platen bolts which hold handle in upright
position.
TIGHTEN LEG BOLTS
1. Carefully turn the toaster upside down for access to legs.
2. Adjust and tighten leg bolts to obtain a level setting for toasting.
3. Set toaster right side up and check for level setting.
4. Adjust leg bolts as necessary until toaster sits level.
5. Plug the power cord into the appropriate electrical receptacle.
6. If the toaster is about to be used, turn the power switch to ON position.
©2000 McDonald's Corporation
Printed in DEC 00
Revised in SEP 00
Page 4 of 5
Tabla de contenido
Solución de problemas
