Tabla de contenido
When
Monthly
Tools
McD Hi Temp Grill Cleaner
(HCS), McD Bun Toaster
Release Agent (HCS), McD
No Scratch Pad, base of
Big Breakfast container,
No. 257 cleaning tool,
clean grill cloths (qty. 6-8),
customer paper napkins or
paper towels, protective
gloves.
Clean Nickel Platen
PREPARING BUN TOASTER
1. If toaster is cool, heat to operating temperature.
IMPORTANT: Bun toaster must be at operating temperature for cleaning.
2. Turn toaster power switch to OFF position and unplug power cord.
CAUTION: Failure to unplug power cord before cleaning may cause
electrical shock.
3. Remove all buns, bun trays, and bun tray liners from the bun toaster stand.
4. Turn on the grill exhaust fan.
5. Move toaster stand in front of grill.
HOW TO CLEAN
1. Firmly attach McD No-Scratch Pad to cleaning tool. Use only nonabrasive blue
No-Scratch pads designed for grill cleaning. Do not use a green pad. It will
damage platen surface.
2. Pour one packet of McD Hi-Temp Grill Cleaner into a breakfast container base.
3. Put on protective gloves.
4. Turn bun board upside-down and lay on upper platen or plate.
5. Dip No-Scratch Pad into Hi-Temp Grill Cleaner.
6. Spread cleaner over bun board and lightly scrub until clean. Apply additional
cleaner as needed. Place bun board in the back sink area for cooling and rinsing.
7. If toaster is equipped with an aluminum plate, repeat step 6 so both sides of plate
are clean.
8. Dip No-Scratch Pad into cleaner and lightly spread a coasting of cleaner onto top
surface of platen.
IMPORTANT: Do not pour cleaner on surface. Apply only with No-Scratch
Pad and Cleaning Tool. Do not scrub while applying cleaner.
9.
Repeat Step 8 for all platen surfaces, including undersides.
10. After repeating cleaner, lightly scrub all platen surfaces (including undersides)
with No-Scratch Pad until all soil liquifies. Apply additional cleaner to cleaning
as needed.
11. Remove No-Scratch Pad from cleaning tool. Fold a clean, damp grill cloth
lengthwise and lay it over the end of the cleaning tool. Thoroughly rinse platens,
including undersides, by wiping with a damp grill cloth. Before wiping platens,
always rinse grill cloth in clear water and wring it out until no soil is seen.
IMPORTANT: Thorough rinsing of the platen is required to ensure proper
release agent performance. Rinse platens with clean grill cloths until no soil
is seen on the cloth.
CAUTION: Do not pour water on platens or use dripping wet grill cloths.
©2000 McDonald's Corporation
Printed in DEC 00
Revised in SEP 00
Page 3 of 5
Tabla de contenido
Solución de problemas
