HHB CDR-850 Instrucciones De Operación página 52

3 1
FADER
REPEAT
4
1
1
2
3
SET
4
1
52
<PRE1282>
En
2
4
TRACK NO.
WRITE
2
2 3
MENU
SKIP ID
CLEAR
MENU
MODES OF RECORDING
AUTO STOP DELAY setting
When making recordings using the digital synchro recording
function, the main unit goes into automatic record-pause
mode when no sound is encountered over a period of time.
Set the duration of no sound that the unit can encounter
before entering the record-pause mode.
1
Press the MENU button repeatedly until "ASd
XXX " is displayed.
2
Use the 41 ¡¢ buttons to select the
AUTO STOP DELAY setting (0 seconds, 10
seconds, OFF).
Initial setting is 10 seconds.
0 seconds
When no sound is encountered, record-pause mode is
activated immediately. However, this setting is not
applicable to the first four seconds of recording even if no
sound is encountered during that time (page 74).
10 seconds
When no sound is encountered for 10 seconds, the
record-pause is activated.
OFF
The AUTO STOP DELAY is disabled regardless of the
length of time that no sound is encountered.
3
Press the SKIP ID SET button to memorize the
setting.
• The question mark disappears from the display and the new
setting is memorized, .
4
Press the 7 button to exit the MENU mode.
SAMPLING RATE CONVERTOR THROUGH OPTION
When the input digital signal has a sampling frequency of
44.1 kHz, it is possible to bypass the internal sampling
frequency converter. This is useful for noise shaped or coded
input signals and allows a digital clone to be made of the
input signal. If the source is a 44.1 kHz signal that has been
speed adjusted (varispeed) the SRC must be turned on to
enable a 44.1 kHz signal to be recorded.
1
Press the MENU button until "SRC xxx " is
displayed.
2
Press the 41 ¡¢ (search) buttons to
select the SRC on (enabled) or SRC off
(disabled)
• Initial setting is SRC on
• When the original setting is changed, a question mark "?"
appears on the screen next to the selected option.
3
Press the SKIP ID SET button to memorize the
setting.
• The question mark "?" is removed from the display and the
new setting is memorized.
4
Press the 7 button to exit the menu mode.