Tabla de contenido
A
PARAREL REMOTE
CONNECTEUR PARALLÈLE DE COMMANDE À DISTANCE
CONTROL REMOTO EN PARALELO
B
3
1
FADER
REPEAT
4
1
1
MENU
2
3
SKIP ID
SET
4
38
<PRE1282>
En
7
6
3
8
1
5
4
2
2
4
TRACK NO.
WRITE
2
2
3
CLEAR
A
8 pin parallel remote control input jacks (DIN 8 pin)
By connecting the circuit shown at the left, remote control
operation of this unit is possible with external switches.
The parallel remote control has priority over the wireless
remote control.
When the same buttons are pressed at the same time on
both units, operation with the parallel remote control will
have priority.
B
To disable the infrared remote control unit.
Use the MENU to set whether the infrared remote control
unit is enabled or disabled.
1
Press the MENU button until "IR-on" is
displayed.
2
41 ¡¢
Press the
select the IR on (enabled) or IR off
(disabled)
• Initial setting is IR on
• When the original setting is changed, a question mark "?"
appears on the screen next to the selected option.
3
Press the SKIP ID SET button to memorise
the setting.
• The question mark "?" is removed from the display and the
new setting is memorized.
4
the 7
Press
button to exit the menu mode.
(search) buttons to
Tabla de contenido
Solución de problemas
