Cable Assembly - Abicor Binzel ABIPLAS WELD 100 POWDER W Instructivo De Servicio

10 Troubleshooting

9.2 Cable assembly

10 Troubleshooting
EN - 20
To sharpen the tungsten electrode, use a sharpening device with a diamond
wheel and the following functional principles:
• The point is sharpened longitudinally through the center axis.
• Automatic regulation of the tungsten electrode drive by gravity.
• Can be set for all electrode diameters.
• Offers continuous angle adjustment.
1 Check screw and plug-type connections for visible damage and tight fit and
replace them if necessary.
NOTICE
• Each time the powder is changed, clean the powder delivery hose with
compressed air to remove powder residues and deposits.
• Never blow compressed air into the front of the nozzles while the torch is
connected. This may soil and destroy the flow meters in the power
source.
2 Disconnect the powder delivery hose and clean it with compressed air on
the system side.
3 Attach the powder delivery hose.
DANGER
Risk of injury and machine damage when handled by
unauthorised persons
Improper repair work and modifications to the product may lead to serious
injuries and machine damage. The product warranty will be rendered
invalid if the unit is handled by unauthorised persons.
• Operating, maintenance, cleaning and repair work may only be carried
out by qualified personnel (in Germany see TRBS 1203).
Please observe the attached document "Warranty". In the event of any doubts
and/or problems, please contact your retailer or the manufacturer.
NOTICE
• Please also consult the operating instructions for the welding components,
such as the power source or powder delivery unit.
®
ABIPLAS WELD 100/150 POWDER W