Emergency Information; Product Description; Technical Data - Abicor Binzel ABIPLAS WELD 100 POWDER W Instructivo De Servicio

®
ABIPLAS WELD 100/150 POWDER W

2.6 Emergency information

3 Product description

3.1 Technical data

Ambient temperature
Relative humidity
Tab. 1 Ambient conditions during operation
Storage in a closed environment, ambient
temperature
Ambient temperature for shipment
Relative humidity
Tab. 2 Ambient conditions for shipment and storage
Type of use
Voltage rating
Protection type of the machine-
side connections (EN 60 529)
Tab. 3 General torch data according to EN 60 974-7
Plasma gas
Shielding gas
Delivery gas
Tab. 4 Process gases type 100/150 according to DIN EN 439
• Do not exceed the maximum limit values for the load data. Overloads lead
to destruction.
• Do not make any constructive changes to this device.
• Only use the plasma powder welding torches in a suitable environment.
• During welding work outdoors, use suitable protection against the weather
conditions.
In the event of an emergency, immediately disconnect the following supplies:
• Power
• Gas supply
Further measures can be found in the "Power source" operating instructions or
the documents for further peripheral devices.
Peak value of 113 V
Argon, argon/helium, helium
Inert or interactive gas mixtures
Inert or interactive gas mixtures
-10°C to +40°C
Up to 90% at 20°C
-10°C to +40°C
-25°C to +55°C
Up to 90% at 20°C
Manual
IP3X
3 Product description
Automatic
Peak value of 141 V
IP2X
0.5 - 1.5 l/min
4 - 12 l/min
3 - 6 l/min
EN - 7