Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5.3 Proper and Compatible Connection to Attachment
Elements
Always ensure that the connecting device snap
hook (or other connector) is compatible with the
harness D-ring, is properly engaged, and is closed
and locked.
6.0 Using a Body Belt
A body belt shall be used for positioning or travel restraint only. Body belts may be used in con-
junction with a full-body harness; however, the fall arrest attachment elements designated on the
harness must be used for fall protection.
6.1 Use of Attachment Elements (D-Rings)
Table 2: Use of Attachment Elements on Body Belts*
Attachment
Elements
Rear - Waist
Hip - Side D-Rings
Us er Ins tru ct ion s - Engl is h
!
WARNING
IMPORTANT NOTE: An improper or incomplete engagement is pos-
sible when the inside diameter of the D-ring is very close to the width of
the snap hook. As a result, when attempting to engage the snap hook of
a connecting device with a D-ring at the back of a harness, the user expe-
riences a feeling of proper engagement while in fact the snap hook sits
only inside the D-ring. This improper or incomplete engagement is unsafe
and is likely to come apart during a fall arrest.
Positioning
!
WARNING
Do not use a body
belt for fall arrest.
Travel
Restraint
15
Tabla de contenido
