Troubleshooting - Coltene BioSonic S1 Guía De Uso

Owner's Guide
IX. Symbols
Class II Equipment
Type BF equipment
Alternating current
Socket for the
Foot Switch
Adjustment for the
water flow
Power Switch
Temperature
50˚C
limitation
-10˚C
80% Humidity
%
limitation
0%
Non-ionizing
electromagnetic
radiation
Caution, consult
accompanying
documents
Indoor use only
Can be autoclaved
24VAC power
supply socket
Water entrance pressure
0.01 MPa - 0.5 MPa
106 kPa
Atmospheric pressure
for storage
50 kPa
Appliance compliance
WEEE directive
Authorized
Representative in the
European Communitity
X. Troubleshooting
Problem
The power line plug is
The scaling tip does not vibrate
and no water flows out when
Foot Switch is pressed
The Foot Switch connec-
The scaling tip does not
vibrate, but water flows out
when foot switch is pressed
The Water Control Knob is
at a minimal setting
The scaling tip vibrates, but
there is no spray when the
Foot Switch is pressed
The water system is
There is still water flowing There is a blockage in the
after the power is turned off electro-magnetic valve
The water control knob is
The Handpiece generates heat
at a minimal setting
The water pressure is not
The amount of spouting water
is minimal
The water line is blocked
The tip loosened due to
The vibration of the
tip is weak
The connection between
the Handpiece and the
The tip is damaged or
There is water leaking from the One of the O-rings is
Handpiece/Cable Connection
The Screw cap is loose
The file does not vibrate
The Endo Tip is damaged
There is noise coming
The Screw Cap is loose
from the Endo Tip
XI. Limited Warranty
Our products are carefully manufactured to meet stringent quality
assurance requirements. Our products are manufactured from new
parts or new and serviceable used parts. Regardless, our warranty
terms apply. This product has been developed specifically for use
in dentistry and is intended to be operated only by qualified dental
professionals in accordance with the instructions contained in this
guide. However, notwithstanding anything contained herein to
the contrary, the user shall at all times be solely responsible for
determining the suitability of the product for the intended purpose
and the method of its use. Any guidance on application technology
offered by or on behalf of the manufacturer, whether written, verbal
or by demonstration, shall not relieve the dental professional of his/
Possible Causes Solutions
Insert plug into socket
loose
Insert Foot Switch
tion is loose connection into its socket
Screw the tip onto the
The tip is loose
Handpiece tightly
Handpiece Issues Contact us
Increase the water supply
using the Water Control
Knob
Clean the water line and
blocked filter
Contact us
Increase the water supply
using the control knob
Increase the water
high enough pressure
Clean the water line and
the filter
Screw the tip onto the
The tip is loose
Handpiece tightly
Screw the tip onto the
the vibration Handpiece tightly
Dry the connection using
hot air
cable is not dry
Replace the tip with a
worn new one
Replace the damaged
damaged O-ring
Screw on the Screw Cap
tightly
Replace the damaged
Endo Tip
Screw on the Screw Cap
tightly
7