Controls And Instruments - GOLDONI TWIST Serie Manejo Y Cuidado

8. Let out the clutch gradually to prevent the machine from jumping the clutch.
9. Never leave the machine unguarded with the engine running.
10.Do not go downhill with the clutch disengaged or the gear shift in neutral. Use
the engine to brake the machine.
If you find you are using the brake a lot when going downhill, put the machine
into a lower gear.
11.Follow the Road Code when on-road driving.
12.Never service, repair or carry out any kind of work on the tractor or attached
implements unless the engine has been turned off, the key removed from the
starter and the attachment lowered to the ground.
Park the machine so as to ensure its stability. Set the handbrake and engage a
gear (1st uphill, reverse for downhill). If necessary use a chock.
13.Do not run the engine in an enclosed area: engine exhaust is poisonous.
14.To prevent risk of fire, do not re-fuel the machine with the engine running.
15.To prevent risk of fire, from time to time check the fuel line and replace it if it
has hardened or shows cracks, splits or any other defects that could
compromise its seal.
16.Do not carry equipment on the machine other than its standard supply kit. Do
not carry passengers.
17.After any handlebar adjustment or rotation, check to make sure that the
safety devices work perfectly.
18.Tag plates and sticker are essential means of information on correct use of
the machine. Replace them when they are illegible or badly worn.
19.The operator must check to be certain that every part of the tractor and,
especially the safety devices, are in good working condition and work to
specs. They should be kept in perfect working condition. If you note any
malfunctioning, fix or repair them in good time. If necessary contact your
nearest Assistance Centre. Failure to observe these instructions releases
manufacturer from all liability.

2. CONTROLS AND INSTRUMENTS

Refer to figs.1,2,3
1 PTO control lever
2 Forward and Reverse control lever
3 Vertical handlebar release lever
4 Speed control lever
5 Engine stop lever - Motorstop
6 Clutch lever
7 Accelerator lever
8 Horizontal handlebar release lever
9 Wheel release lever
10Differential lock lever (for models with differential)
33